Steel Column Design Worked Example

About This Reference

Steel column design worked example per AISC 360 LRFD Chapter E. Slenderness, critical stress, and axial capacity calculations.

Consult this reference for design values, tables, and code provisions related to steel column design worked example.

How to Use This Reference

1. Find the value, table, or provision you need below.
2. Cross-reference against your project specification and the applicable code edition.
3. Where this reference covers multiple design codes, select the tab or section matching your jurisdiction.

Design Code Coverage

This reference page covers provisions relevant to one or more of the following standards:

• AISC 360 — Steel Construction Manual, 15th Edition (LRFD & ASD).
• AS 4100:2020 — Steel Structures (limit state design).
• EN 1993-1-1 / 1-8 — Eurocode 3, General rules and connection design.
• CSA S16:2019 — Design of Steel Structures (limit states design).

Important Notes

• Values shown are for quick reference only and must be verified against the source standard.
• Material certifications (Mill Test Reports) take precedence over tabulated minimums.
• Always confirm the applicable edition of the code for your project jurisdiction.

Page last updated: 2026-03-15. All calculations and reference values must be verified by a qualified engineer before use in design.