What is the section modulus of HSS10X5X3/8?

Sx = 24.1 inÃÂÃÂ³, Zx = 30.4 inÃÂÃÂ³ (strong axis). Sy = 16.2 inÃÂÃÂ³, Zy = 18.7 inÃÂÃÂ³ (weak axis).

What steel grade is standard for HSS10X5X3/8?

ASTM A500 Grade C (Fy = 50 ksi) or Grade B (Fy = 46 ksi). Verify with mill certificate.

What is the moment of inertia of HSS10X5X3/8?

Ix = 120 inÃÂ¢ÃÂÃÂ´ about the strong axis and Iy = 40.6 inÃÂ¢ÃÂÃÂ´ about the weak axis. The radius of gyration is rx = 3.53 in and ry = 2.05 in.

HSS10X5X3/8 Steel Rectangular HSS — Section Properties

Dimensions

Property	Value	Unit
Height (h)	10	254.0 mm
Width (w)	5	127.0 mm
Wall Thickness (t)	0.375	9.5 mm
Area (A)	9.67 in²	62.4 cmÃÂÃÂ²
Weight	35.13 lb/ft	52.3 kg/m

Elastic Section Properties

Property	Strong Axis (X-X)	Weak Axis (Y-Y)	Unit
Moment of Inertia (I)	120	40.6	in⁴
Elastic Section Modulus (S)	24.1	16.2	in³
Plastic Section Modulus (Z)	30.4	18.7	in³
Radius of Gyration (r)	3.53	2.05	in

Torsional Properties

Property	Value	Unit
Torsional Constant (J)	100	in⁴
Warping Constant (Cw)	0	in⁶

Section Profile Summary

Closed tubular section with J = 100 in⁴ — torsional stiffness is significantly higher than an open section of equivalent weight. The flat faces accept welded gusset and end-plate connections without stiffeners.

Key Design Checks (AISC 360)

Check	Formula	This Section
Plastic moment	Mp = Zx × Fy	1,520 kip-in
Deflection	Δ = 5wLÃÂ¢ÃÂÃÂ´/(384EIx)	Use Ix = 120 in⁴
Torsion	St. Venant = GJ/L	J = 100 in⁴
Column buckling	KL/r ÃÂ¢ÃÂÃÂ Fcr	r_x = 3.53 in

Design Notes

Wall slenderness: b/t limits per AISC 360 Table B4.1a define compact, noncompact, and slender classifications. Round HSS use D/t limits.
HSS connection design: Welded connections to HSS walls must check chord plastification, punching shear, and sidewall yielding per AISC 360 Chapter K. Through-bolting requires reinforcing sleeves or plate washers.
Concrete-filled HSS: For composite column applications, filling the HSS with concrete increases axial capacity and fire resistance. Composite design follows AISC 360 Chapter I.

Verification (AISC 360): All designs using this section must be verified by a licensed Professional Engineer. Before finalizing member selection, check beam-column interaction (P-M), lateral-torsional buckling, serviceability deflections, and all connection limit states. See Engineering Disclaimer.

Worked Example: Column Capacity — hss10x5x3-8

Scenario: Exterior column in a 5-story moment frame Unbraced length L = 8 ft.

Given:

hss10x5x3-8: Ag = 9.67 in²
r_min = 3.53 in (governing radius of gyration)
Steel: ASTM A500 Gr. C, Fy = 50 ksi, E = 29,000 ksi
Effective length factor K = 1.0 (braced against sidesway)

Step 1 — Slenderness ratio:

KL/r = 96 / 3.53 = 27

Step 2 — Determine critical stress Fcr (AISC 360 Chapter E):

Elastic buckling stress: Fe = ÃÂÃÂÃÂÃÂ²E / (KL/r)ÃÂÃÂ² = ÃÂÃÂÃÂÃÂ² × 29,000 / (27)ÃÂÃÂ² = 393 ksi

For HSS with KL/r ÃÂ¢ÃÂÃÂ¤ 4.71ÃÂ¢ÃÂÃÂ(E/Fy) = 4.71ÃÂ¢ÃÂÃÂ(29,000/50) = 113.4:

If KL/r ÃÂ¢ÃÂÃÂ¤ 113.4: Fcr = 0.658^(Fy/Fe) × Fy (inelastic buckling) If KL/r > 113.4: Fcr = 0.877Fe (elastic buckling)

Step 3 — Design compressive strength:

φPn = φ × Fcr × Ag = 0.9 × Fcr × 9.67 ÃÂ¢ÃÂÃÂ 435 kips (preliminary)

For a precise capacity accounting for local buckling and the exact KL/r value, use the Column Capacity Calculator with this section's properties.

Related Resources

Design Resources

Section Properties Lookup — Compare with similar sections
Steel Beam Sizes Reference — Standard beam dimensions

Educational reference only. Verify all section properties against the current AISC 360 Manual and mill certificates before design. Results are PRELIMINARY — NOT FOR CONSTRUCTION.